Sming Framework API
Sming - Open Source framework for high efficiency WiFi SoC ESP8266 native development with C++ language.
|
This is the complete list of members for RF24, including all inherited members.
available(void) | RF24 | |
available(uint8_t *pipe_num) | RF24 | |
begin(void) | RF24 | |
ce(int level) | RF24 | protected |
csn(int mode) | RF24 | protected |
disableCRC(void) | RF24 | |
enableAckPayload(void) | RF24 | |
enableDynamicPayloads(void) | RF24 | |
flush_rx(void) | RF24 | protected |
flush_tx(void) | RF24 | protected |
get_status(void) | RF24 | protected |
getCRCLength(void) | RF24 | |
getDataRate(void) | RF24 | |
getDynamicPayloadSize(void) | RF24 | |
getPALevel(void) | RF24 | |
getPayloadSize(void) | RF24 | |
isAckPayloadAvailable(void) | RF24 | |
isPVariant(void) | RF24 | |
isValid() | RF24 | inline |
openReadingPipe(uint8_t number, uint64_t address) | RF24 | |
openWritingPipe(uint64_t address) | RF24 | |
powerDown(void) | RF24 | |
powerUp(void) | RF24 | |
print_address_register(const char *name, uint8_t reg, uint8_t qty=1) | RF24 | protected |
print_byte_register(const char *name, uint8_t reg, uint8_t qty=1) | RF24 | protected |
print_observe_tx(uint8_t value) | RF24 | protected |
print_status(uint8_t status) | RF24 | protected |
printDetails(void) | RF24 | |
read(void *buf, uint8_t len) | RF24 | |
read_payload(void *buf, uint8_t len) | RF24 | protected |
read_register(uint8_t reg, uint8_t *buf, uint8_t len) | RF24 | protected |
read_register(uint8_t reg) | RF24 | protected |
RF24(uint8_t _cepin, uint8_t _cspin) | RF24 | |
setAutoAck(bool enable) | RF24 | |
setAutoAck(uint8_t pipe, bool enable) | RF24 | |
setChannel(uint8_t channel) | RF24 | |
setCRCLength(rf24_crclength_e length) | RF24 | |
setDataRate(rf24_datarate_e speed) | RF24 | |
setPALevel(rf24_pa_dbm_e level) | RF24 | |
setPayloadSize(uint8_t size) | RF24 | |
setRetries(uint8_t delay, uint8_t count) | RF24 | |
startListening(void) | RF24 | |
startWrite(const void *buf, uint8_t len) | RF24 | |
stopListening(void) | RF24 | |
testCarrier(void) | RF24 | |
testRPD(void) | RF24 | |
toggle_features(void) | RF24 | protected |
whatHappened(bool &tx_ok, bool &tx_fail, bool &rx_ready) | RF24 | |
write(const void *buf, uint8_t len) | RF24 | |
write_payload(const void *buf, uint8_t len) | RF24 | protected |
write_register(uint8_t reg, const uint8_t *buf, uint8_t len) | RF24 | protected |
write_register(uint8_t reg, uint8_t value) | RF24 | protected |
writeAckPayload(uint8_t pipe, const void *buf, uint8_t len) | RF24 |